LED Rope Light Custom Cut - RGB

FREE SHIPPING AVAILABLE!

(Must select "USPS Parcel Post" at checkout.)

Price shown above is average price per foot; please select your desired length based on the product's available cutting increment.

Lighting Facts
LED Color	Red, Green, Blue
Length	Custom
Connection	4 wire
Dimensions	3/8" x 3/4" rectangular
Voltage	120V AC
Luminous Intensity	3500 mcd
Temperature Rating	-60°F - 220°F
Beam Angle	25°
Bulb Orientation [?]	Vertical (directional)
Bulb Spacing	1 inch
Outer Tubing Color	Clear
Power Consumption	1.5 watts per foot
Cutting Interval	39 inches
Rated Lifespan	100,000 hours
Maximum Run	600'
Suitable for Outdoor Use	Yes
Dimmable	No
Flashable	Yes
Color Changing	Yes
UL Listed	No

CLICK HERE to see the RGB LED Rope Lights in action!

All custom cut rope lights sales are final and are non-returnable/non-refundable.

These rope lights come pre-attached with a standard power cord. If you are ordering a separate controller, and would like it pre-attached in lieu of the standard power cord, please write "ATTACH CONTROLLER TO CC RGB ROPE LIGHT" in the Comments field at checkout.

All custom cut rope lights sales are final and are non-returnable/non-refundable.

Refer to our Rope Light Instructions page for an overview of how to work with rope lights.

Key points to remember:

• Only cut rope lights at the predetermined cutting intervals. Look for the cut marks on the outer tubing.
• LEDs are sensitive to polarity. As such, LED rope lights may appear to not function correctly if the polarity of the electrical current is opposite from what the LEDs are expecting. Instead of simply not lighting up (as other 2-wire LED rope lights do), these 4-wire RGB LED rope lights will often just faintly illuminate when the polarity is incorrect. This can be misinterpreted as the rope lights being defective, when in fact it is merely a polarity issue. Correcting the polarity will return the RGB LED rope lights to their full brightness. The "proper" way to correct polarity is to connect the power cord to the opposite end of the rope light run. But with the RGB LED rope lights, there is a "quick fix" method whereby you can simply flip the power cord over 180°, reversing the connection of the inner 4 wires. (This is best used only as troubleshooting test to determine if polarity is the cause of a certain problem. The "proper" polarity fix mentioned above is recommended for final installation.)