LED Rope Light 164' - RGB

Share |

Free Accessory Pack included!

3 5' Power Cords with Inline Rectifier and Power Connections

10 End Caps

2 Y-Connectors

2 Female to Female Extensions

5 Inline Splices

50 Mounting Clips

1 Inline Mini Controller (powers up to 164')

CLICK HERE to see the RGB LED Rope Lights in action!

Refer to our Rope Light Instructions page for an overview of how to work with rope lights.

Key points to remember:

Only cut rope lights at the predetermined cutting intervals. Look for the cut marks on the outer tubing.
LEDs are sensitive to polarity. As such, LED rope lights may appear to not function correctly if the polarity of the electrical current is opposite from what the LEDs are expecting. Instead of simply not lighting up (as other 2-wire LED rope lights do), these 4-wire RGB LED rope lights will often just faintly illuminate when the polarity is incorrect. This can be misinterpreted as the rope lights being defective, when in fact it is merely a polarity issue. Correcting the polarity will return the RGB LED rope lights to their full brightness. The "proper" way to correct polarity is to connect the power cord to the opposite end of the rope light run. But with the RGB LED rope lights, there is a "quick fix" method whereby you can simply flip the power cord over 180°, reversing the connection of the inner 4 wires. (This is best used only as troubleshooting test to determine if polarity is the cause of a certain problem. The "proper" polarity fix mentioned above is recommended for final installation.)