   These connectors provide the necessary connection to attach power cords and other extensions to your 2-Wire 1/2" rope lights.
- Remove the threaded collar from the connector and slide it over the rope light. Push it up a bit to keep it out of the way.
- Align the sharp pins in the connector with the inner wires of the rope light. (Note that pins/wires are offset from centerline of rope light.) Firmly and carefully push the connector and its pins into the rope light, making sure the pins make secure contact with the rope light's corresponding inner wires.
- Slide the threaded collar (which is still resting on the rope light) back down over the threaded wings of the connector and screw on. This will compress the wings of the connector, tightening its grip on the rope light.
- You are now ready to attach a power cord or other accessory piece to the other side of the connector.
|  |  Retail Price: $11.25 Our Price: $8.99  |  Retail Price: $90.00 Our Price: $79.99 |  Retail Price: $10.00 Our Price: $7.99 |  Retail Price: $150.00 Our Price: $134.99 |
|
|
